View SP-150-75_4912024.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

150W Single Output with PFC Function
Features :
Universal AC input / Full range
SP-150
series
Built-in active PFC function, PF>0.93 Protections: Short circuit / Overload / Over voltage / Over temperature Built-in constant current limiting circuit Remote ON-OFF control(Optional) LED indicator for power on 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty
..
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION SP-150-3.3 3.3V 30A 0 ~ 30A 99W SP-150-5 5V 30A 0 ~ 30A 150W 100mVp-p 2.0% 0.5% 1.0% SP-150-7.5 7.5V 20A 0 ~ 20A 150W 100mVp-p 2.0% 0.5% 1.0% SP-150-12 12V 12.5A 0 ~ 12.5A 150W 100mVp-p 2.0% 0.5% 0.5% SP-150-13.5 SP-150-15 13.5V 11.2A 0 ~ 11.2A 151.2W 100mVp-p 2.0% 0.5% 0.5% 15V 10A 0 ~ 10A 150W 100mVp-p 2.0% 0.5% 0.5% SP-150-24 24V 6.3A 0 ~ 6.3A 150W 150mVp-p 1.0% 0.5% 0.5% SP-150-27 27V 5.6A 0 ~ 5.6A 151.2W 150mVp-p 1.0% 0.5% 0.5% SP-150-48 48V 3.2A 0 ~ 3.2A 153.6W 250mVp-p 1.0% 0.5% 0.5%
RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE TOLERANCE Note.3 2.0% 0.5% 1.0%
3.14 ~ 3.63V 4.75 ~ 5.5V
7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V
600ms, 30ms at full load 20ms at full load
Note.5 85 ~ 264VAC
120 ~ 370VDC PF>0.98/115VAC at full load 79% 80% 80% 81% 83% 84% 84%
47 ~ 63Hz PF>0.93/230VAC 67% 75%
2.5A/115VAC 1.2A/230VAC COLD START 40A/230VAC <2mA / 240VAC 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover
95 5 (TSW1 : detect on heatsink of power transistor) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF -10 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY -20 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 191.2K hrs min. MIL-HDBK-217F (25 ) 199*99*50mm (L*W*H) 0.76Kg; 20pcs/16.4Kg/1.28CUFT
ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SP-150-SPEC 2007-10-25
150W Single Output with PFC Function
Mechanical Specification
199 20 25 70 35 117 65 133
SP-150
Case No. 916A
series
Unit:mm
CN1
R.C. +V ADJ.
1 2
LED
7 6 5 4 3 2 1
9.5
51
2-M4 L=5mm
49.5
5-M3 L=3mm
38
8
16
10
119
79
99
15 142 25
Terminal Pin No. Assignment
Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4,5 6,7 Assignment DC OUTPUT -V DC OUTPUT +V
11 max.
Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional)
25
6-M4 L=6mm
12.5
Pin No. 1 2
Assignment RC+ RC-
25
50
Mating Housing JST XHP or equivalent
Terminal JST SXH-001T-P0.6 or equivalent
Block Diagram
I/P EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER CONSTANT CURRENT LIMITING & DETECTION CIRCUIT O.V.P. O.T.P. REMOTE CONTROL
PFC fosc : 67KHz PWM fosc : 134KHz
+V -V
FG ACTIVE START CIRCUIT
O.L.P.
PWM & PFC CONTROL
CN1
Derating Curve
Output Derating VS Input Voltage
Ta=25
100
SP-150-12~48 SP-150-3.3~7.5 (With 18CFM FAN)
100 90 80
80
60
LOAD (%)
LOAD (%)
40 45 45 50 50 (HORIZONTAL) 55 (VERTICAL)
40
SP-150-3.3 SP-150-5 SP-150-7.5
70 60 50 40
20
-10 -10
0 0
10 10
20 20
30 35
85
100
115
135
155
230
264
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (VAC) 60Hz
File Name:SP-150-SPEC 2007-10-25

▲Up To Search▲

Price & Availability of SP-150-75

	To Download SP-150-75 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .